Android | Why enable “airplane mode” during flight | Smartphones | Cell Phones | நடைவழி | Nnda | nnni | Information

The Android cell phones They have continuous improvements in both processor and battery. However, there are details that will not escape the eyes of its users. One function is “airplane mode” and with this button you can completely disconnect everything, including calls you receive from someone else.

Nowadays many airlines always ask to operate it Turn off the cell phone in “Airplane Mode” or when the plane takes off or lands. Do you know why this is happening? Does it cause anything? Portal Xataka Explains some of the reasons.

View: What is the small hole under your Android mobile and when to use it

Why you need to enable “Aircraft Mode” on your Android cell phone during the flight

• Evidence reveals that it has now been found that having a cell phone with active data during the flight does not cause accidents.
• Also, “Airplane Mode” is believed to control the bands your phone uses so that they do not interfere with cockpit communication and aircraft controls.

• In a long thread Reddit It has been mentioned that in the communications between the pilot and the reception room, a kind of murmur is heard if all the passengers are not operating “airplane mode”.
• This sound, referring to the source, does not cause interruptions or interruptions, but it is very annoying.
• While this does not create anything, in the long run many airlines will force you to implement “airplane mode” as a precaution.

What happens if I put the phone in airplane mode?

As its name implies, it is an option that allows the pilot to use the device on an airplane to disable all wireless connections (WiFi, data, etc.) with a single touch without interfering with communications.

What happens if you do not use airplane mode?

What happens if I forget to turn on airplane mode? The website says that if you do not switch to airplane mode, your cell phone or cellular-enabled tablet will try to make contact with all the cell phone towers on the ground where the plane passes. smartertravel.com.

Why are you asked to enable airplane mode?

According to the website cntravler.comPilots have noted that cell phones that transmit signals can cause audible interference to aircraft radios. This interruption, in turn, can block radio frequency for a second or two, causing confusion for pilots and air traffic control.

What is the small hole located in your cell phone

• The small hole in the top of your cell phone is used to improve the quality of your calls and reduce external noise. Only then will they be heard more clearly.
• However the The small hole in the bottom of your cell phone acts as a microphone.
• Many may have thought that the speaker also acted as a microphone for their cell phone, but, if this is your thing, you are completely wrong..
• You should always be careful when inserting the safety pin, pin, earring or other sharp object into this hole as it will damage the microphone very quickly.
• There will often be a hole next to your cell phone’s charging port or connector. Always try to keep it clean so as not to reduce its useful life.

Why is WhatsApp not receiving messages?

If you make sure your phone is connected to the internet, there are a few reasons why messages may be coming Share Not sent: You need to restart your phone or turn it off and on. The contact you are sending the message to has blocked your number.

What happens if I restore my Vostop?

After reinstalling WhatsApp, one will have the same account and privacy settings. Similarly, previously blocked numbers will continue to appear in the blacklist. However, the website states that when you delete your WhatsApp account, all settings and blocked numbers will be reset and deleted. techzim.co.zw.

This is the solution when your calls are heard at low volume on Android

• First, go to “Settings” or “Settings” on your smartphone Android.
• Then enable “Developer Mode” and click on “About Phone”> “Software Info” section to do so.
• Tap the “Built Number” option here several times until you receive a warning that “Developer Mode is already enabled”.
• Go to “Settings” and scroll down and you will see that you have already enabled Developer Mode and press it.
• The final step is to find and activate the “Disable complete volume” switch.

That’s it, what this tool will do is reset the output sound from the call speaker to factory mode so you have clean and clear audio, so you don’t have to say the usual phrase: “I can not hear you, I’ll call you back”.

What is the “Bedtime Mode” of your Android cell phone?

• Android terminals have “sleep mode” and can be accessed by moving the notification bar.
• Now tap on the moon symbol with stars.
• When you do that, you’ll be given a box where you can define the exact time you want to activate “sleep time mode”.
• You also have the function of enabling black and white mode or gray scale to prevent you from focusing on your dream.
• Similarly, “sleep mode” will reduce the brightness of your screen and avoid visual fatigue.

How To Remove Navigation Bar From Your Android Cell Phone

• First you need to enter the settings of your mobile device.
• Go for accessibility or gestures.
• There you should see a tab called “System Navigation”.
• Select what you want to do with the gestures.
• At that point the navigation menu will disappear.
• With this, you can go back to the previous page by pressing the side button.
• If you want to call Google Assistant, press the bottom of your mobile within two seconds.
• Also, if you want to close all the open apps, swipe up from the bottom of your mobile screen.
• Above all, you can follow a short tutorial on how to properly use “gesture navigation”.